Skip To Product Information
1 of 2

EASY-SCALE

EASY-SCALE Wave Spas Tahoe Hot Tub Maintenance Descaler Kit

EASY-SCALE Wave Spas Tahoe Hot Tub Maintenance Descaler Kit

RRP £36.00
RRP Sale Price £36.00
-Liquid error (snippets/price line 121): divided by 0% OFF! Sold Out
impact icon
Every order plants 3 trees & removes 15 plastic bottles
an information button

Available To Order

Product Specifications:

📐 Sizes +

For Wave Spas Tahoe Models Only

🎨 Colours +

Blue

🔒 Manufacturers Guarantee* +

1 Year

🚚 Delivery Information* +

FREE Express Delivery on this product!

🛠️ Installation* +

1. Ensure the Wave Spa is completely empty of water.
2. Switch off the pump.
3. Unscrew and remove the filter from inside the hot tub.
4. Using the wrench supplied with your Wave Spa, loosen and remove the 2 internal pump fittings. If you do not have the original wrench, suitable water pump pliers can be used carefully to avoid damaging the threads.
5. Attach the EASY-SCALE system to the pump by screwing the large nut sections of the pre-assembled pipes onto both pump fittings.
6. Screw the 2 blue fittings onto the EASY-SCALE chamber.
7. Tighten all fittings and caps by hand only. Do not overtighten or use pliers on the EASY-SCALE fittings.
8. Fill the EASY-SCALE chamber with clean water.
9. Switch the pump on and check carefully for leaks.
10. Tighten any fittings or caps gently by hand if required.
11. Top the EASY-SCALE chamber up to around 50mm below the top.
12. Add Oust or another suitable descaling solution.
13. Run the pump for a minimum of 15–30 minutes with the heater set to around 30°C.
14. Ideally allow the solution to reach approximately 35–40°C. If the temperature rises above 40°C, reduce the heat accordingly.
15. The water may turn milky during descaling. This is normal and indicates that limescale is being removed.
16. Switch off the pump.
17. Place an empty jug beneath the bottom fitting.
18. Remove the blue bottom cap and allow the used descaling solution to drain into the jug.
19. Refit the blue bottom cap.
20. Refill the EASY-SCALE chamber with clean fresh water.
21. Run the pump again for at least 5–10 minutes to rinse the internal system.
22. Repeat the drain and rinse process if necessary until the water runs clear.
23. Remove the EASY-SCALE kit from the pump.
24. Store the assembled pipes inside the EASY-SCALE chamber ready for next use.
25. Refit the original Wave Spa pump fittings.
26. Replace the filter and refill the hot tub with water.
27. Switch the pump back on and use as normal.

View Full Details

Product Description:

Keep your Wave Tahoe performing efficiently with the EASY-SCALE Hot Tub Descaler Kit, a specialist maintenance system designed to remove limescale from the spa’s integrated heater, pump and internal waterways. Developed for compatible Wave Spa systems, this simple home-maintenance solution helps protect circulation, heating performance and internal components from the effects of hard water build-up.

EASY-SCALE works in much the same way as a coffee machine descaling cycle, circulating a suitable descaling solution directly through the internal parts of your Wave Tahoe. This allows the treatment to reach areas that ordinary surface cleaning cannot, helping dissolve mineral deposits that can restrict water flow, reduce heating efficiency and put unnecessary strain on the pump and heater. Limescale build-up can also contribute to common performance issues and error codes such as E3, making regular descaling an important part of preventative spa care.

Hard water can leave deposits surprisingly quickly, especially in areas where kettles and taps regularly show visible white scale. The same minerals can gradually collect inside your hot tub’s hidden heating and circulation system, where they are much harder to detect. If left untreated, these deposits may affect performance and increase wear on important internal components. Using EASY-SCALE regularly gives you a straightforward way to tackle that build-up before it becomes a more significant problem.

The kit is designed to make routine maintenance as simple as possible and includes the EASY-SCALE chamber, screw-on caps, pre-assembled fitting pipes and descaling solution for UK orders. Once connected, the solution is circulated through the Wave Tahoe’s integrated system before being drained and thoroughly rinsed with fresh water, helping flush away loosened scale from the internal waterways.

For most owners, EASY-SCALE recommends carrying out a descale around three to four times per year. More frequent or repeated treatments may be useful in particularly hard water areas. Whether you are maintaining a healthy system, trying to improve reduced flow or tackling an E3-related issue, the EASY-SCALE Hot Tub Descaler Kit offers a simple and cost-effective way to help protect your Wave Tahoe and keep it working reliably.

Like this EASY-SCALE model, but not 100% comitted? Why not see what other designs they have to offer...