Skip To Product Information
1 of 2

EASY-SCALE

EASY-SCALE Wave Spas Como Hot Tub Maintenance Descaler Kit

EASY-SCALE Wave Spas Como Hot Tub Maintenance Descaler Kit

RRP £36.00
RRP Sale Price £36.00
-Liquid error (snippets/price line 121): divided by 0% OFF! Sold Out
impact icon
Every order plants 3 trees & removes 15 plastic bottles
an information button

Available To Order

Product Specifications:

📐 Sizes +

For Wave Spas Como Models Only

🎨 Colours +

Blue

🔒 Manufacturers Guarantee* +

1 Year

🚚 Delivery Information* +

FREE Express Delivery on this product!

🛠️ Installation* +

1. Ensure the Wave Spa is completely empty of water.
2. Switch off the pump.
3. Unscrew and remove the filter from inside the hot tub.
4. Using the wrench supplied with your Wave Spa, loosen and remove the 2 internal pump fittings. If you do not have the original wrench, suitable water pump pliers can be used carefully to avoid damaging the threads.
5. Attach the EASY-SCALE system to the pump by screwing the large nut sections of the pre-assembled pipes onto both pump fittings.
6. Screw the 2 blue fittings onto the EASY-SCALE chamber.
7. Tighten all fittings and caps by hand only. Do not overtighten or use pliers on the EASY-SCALE fittings.
8. Fill the EASY-SCALE chamber with clean water.
9. Switch the pump on and check carefully for leaks.
10. Tighten any fittings or caps gently by hand if required.
11. Top the EASY-SCALE chamber up to around 50mm below the top.
12. Add Oust or another suitable descaling solution.
13. Run the pump for a minimum of 15–30 minutes with the heater set to around 30°C.
14. Ideally allow the solution to reach approximately 35–40°C. If the temperature rises above 40°C, reduce the heat accordingly.
15. The water may turn milky during descaling. This is normal and indicates that limescale is being removed.
16. Switch off the pump.
17. Place an empty jug beneath the bottom fitting.
18. Remove the blue bottom cap and allow the used descaling solution to drain into the jug.
19. Refit the blue bottom cap.
20. Refill the EASY-SCALE chamber with clean fresh water.
21. Run the pump again for at least 5–10 minutes to rinse the internal system.
22. Repeat the drain and rinse process if necessary until the water runs clear.
23. Remove the EASY-SCALE kit from the pump.
24. Store the assembled pipes inside the EASY-SCALE chamber ready for next use.
25. Refit the original Wave Spa pump fittings.
26. Replace the filter and refill the hot tub with water.
27. Switch the pump back on and use as normal.

View Full Details

Product Description:

Protect your Wave Como and help keep its integrated pump and heating system working efficiently with the EASY-SCALE Hot Tub Descaler Kit. Designed for compatible Wave Spa systems, this specialist maintenance kit targets limescale build-up inside the heater, pump and internal waterways, helping to maintain strong circulation, reliable heating and smoother overall performance.

The EASY-SCALE system works in a similar way to the descale cycle on a coffee machine, allowing a suitable descaling solution to circulate directly through the internal parts of your Wave Como. This reaches areas that standard cleaning products simply cannot access. As the treatment circulates, it helps break down and remove scale deposits that can restrict water flow, reduce heating efficiency and place additional strain on the pump. Limescale build-up can also contribute to performance issues and error codes such as E3, making routine descaling an important part of long-term spa care.

If you live in a hard water area, scale can build up much faster than you might expect. A useful indication is the inside of your kettle — if you regularly see white deposits forming there, similar mineral build-up can also occur inside your hot tub’s internal heating and circulation system. Over time, this can affect performance and increase wear on components that are difficult to inspect or clean manually. EASY-SCALE provides a practical way to tackle this hidden build-up before it develops into a more serious problem.

The kit is designed for straightforward home maintenance and includes the EASY-SCALE chamber, screw-on caps, pre-assembled fitting pipes and descaling solution for UK orders. Once connected to the Wave Como, the descaling solution is circulated through the integrated heater and pump before the system is thoroughly flushed with fresh water, helping remove loosened deposits from the internal waterways.

For ongoing preventative maintenance, EASY-SCALE recommends descaling around three to four times each year. In areas with particularly hard water, more frequent or repeated treatments may be worthwhile. Whether you are carrying out routine maintenance, trying to restore reduced water flow or dealing with an E3-related performance issue, the EASY-SCALE Hot Tub Descaler Kit offers a simple and cost-effective way to help protect your Wave Como and keep it running at its best.

Like this EASY-SCALE model, but not 100% comitted? Why not see what other designs they have to offer...