Skip To Product Information
1 of 2

EASY-SCALE

EASY-SCALE Wave Spas Aegean Hot Tub Maintenance Descaler Kit

EASY-SCALE Wave Spas Aegean Hot Tub Maintenance Descaler Kit

RRP £36.00
RRP Sale Price £36.00
-Liquid error (snippets/price line 121): divided by 0% OFF! Sold Out
impact icon
Every order plants 3 trees & removes 15 plastic bottles
an information button

Available To Order

Product Specifications:

📐 Sizes +

For Wave Spas Aegean Models Only

🎨 Colours +

Blue

🔒 Manufacturers Guarantee* +

1 Year

🚚 Delivery Information* +

FREE Express Delivery on this product!

🛠️ Installation* +

1. Ensure the Wave Spa is completely empty of water.
2. Switch off the pump.
3. Unscrew and remove the filter from inside the hot tub.
4. Using the wrench supplied with your Wave Spa, loosen and remove the 2 internal pump fittings. If you do not have the original wrench, suitable water pump pliers can be used carefully to avoid damaging the threads.
5. Attach the EASY-SCALE system to the pump by screwing the large nut sections of the pre-assembled pipes onto both pump fittings.
6. Screw the 2 blue fittings onto the EASY-SCALE chamber.
7. Tighten all fittings and caps by hand only. Do not overtighten or use pliers on the EASY-SCALE fittings.
8. Fill the EASY-SCALE chamber with clean water.
9. Switch the pump on and check carefully for leaks.
10. Tighten any fittings or caps gently by hand if required.
11. Top the EASY-SCALE chamber up to around 50mm below the top.
12. Add Oust or another suitable descaling solution.
13. Run the pump for a minimum of 15–30 minutes with the heater set to around 30°C.
14. Ideally allow the solution to reach approximately 35–40°C. If the temperature rises above 40°C, reduce the heat accordingly.
15. The water may turn milky during descaling. This is normal and indicates that limescale is being removed.
16. Switch off the pump.
17. Place an empty jug beneath the bottom fitting.
18. Remove the blue bottom cap and allow the used descaling solution to drain into the jug.
19. Refit the blue bottom cap.
20. Refill the EASY-SCALE chamber with clean fresh water.
21. Run the pump again for at least 5–10 minutes to rinse the internal system.
22. Repeat the drain and rinse process if necessary until the water runs clear.
23. Remove the EASY-SCALE kit from the pump.
24. Store the assembled pipes inside the EASY-SCALE chamber ready for next use.
25. Refit the original Wave Spa pump fittings.
26. Replace the filter and refill the hot tub with water.
27. Switch the pump back on and use as normal.

View Full Details

Product Description:

Keep your Wave Aegean working efficiently with the EASY-SCALE Hot Tub Descaler Kit, a dedicated maintenance system designed to remove limescale from the spa’s integrated heater, pump and internal waterways. Developed for compatible Wave Spa models, it helps maintain good circulation, efficient heating and reliable performance by tackling the mineral deposits that can build up inside the system over time.

The EASY-SCALE system operates in much the same way as a coffee machine descale cycle, circulating a suitable descaling solution through the hidden internal components of your Wave Aegean. This reaches areas that normal cleaning cannot access, helping dissolve limescale that may restrict water flow, reduce heating efficiency and place additional strain on the pump and heater. In some cases, this build-up can contribute to performance issues and error codes such as E3, making routine descaling a sensible part of preventative spa care.

Hard water can cause scale to form surprisingly quickly, especially in areas where white deposits are already noticeable inside kettles or around taps. The same minerals can also accumulate inside your hot tub’s heating and circulation system, where they are much harder to see. Left untreated, this hidden build-up may affect performance and increase wear on key internal components. EASY-SCALE gives you a straightforward way to target these deposits before they become a more serious problem.

The kit is designed for simple home use and includes the EASY-SCALE chamber, screw-on caps, pre-assembled fitting pipes and descaling solution for UK orders. Once connected to the Wave Aegean, the treatment circulates through the integrated pump and heater before the system is drained and thoroughly rinsed with clean water, helping remove loosened scale from the internal waterways.

For regular maintenance, EASY-SCALE recommends descaling around three to four times per year. In particularly hard water areas, more frequent or repeated treatments may be beneficial. Whether you are carrying out routine preventative care, trying to improve reduced water flow or dealing with an E3-related issue, the EASY-SCALE Hot Tub Descaler Kit offers a simple and cost-effective way to help protect your Wave Aegean and keep it performing at its best.

Like this EASY-SCALE model, but not 100% comitted? Why not see what other designs they have to offer...