Skip To Product Information
1 of 3

EASY-SCALE

EASY-SCALE Wave Spas Garda Hot Tub Maintenance Descaler Kit

EASY-SCALE Wave Spas Garda Hot Tub Maintenance Descaler Kit

RRP £36.00
RRP Sale Price £36.00
-Liquid error (snippets/price line 121): divided by 0% OFF! Sold Out
impact icon
Every order plants 3 trees & removes 15 plastic bottles
an information button

Available To Order

Product Specifications:

📐 Sizes +

For Wave Spas Garda Models Only

🎨 Colours +

Blue

🔒 Manufacturers Guarantee* +

1 Year

🚚 Delivery Information* +

FREE Express Delivery on this product!

🛠️ Installation* +

1. Ensure the Wave Spa is completely empty of water.
2. Switch off the pump.
3. Unscrew and remove the filter from inside the hot tub.
4. Using the wrench supplied with your Wave Spa, loosen and remove the 2 internal pump fittings. If you do not have the original wrench, suitable water pump pliers can be used carefully to avoid damaging the threads.
5. Attach the EASY-SCALE system to the pump by screwing the large nut sections of the pre-assembled pipes onto both pump fittings.
6. Screw the 2 blue fittings onto the EASY-SCALE chamber.
7. Tighten all fittings and caps by hand only. Do not overtighten or use pliers on the EASY-SCALE fittings.
8. Fill the EASY-SCALE chamber with clean water.
9. Switch the pump on and check carefully for leaks.
10. Tighten any fittings or caps gently by hand if required.
11. Top the EASY-SCALE chamber up to around 50mm below the top.
12. Add Oust or another suitable descaling solution.
13. Run the pump for a minimum of 15–30 minutes with the heater set to around 30°C.
14. Ideally allow the solution to reach approximately 35–40°C. If the temperature rises above 40°C, reduce the heat accordingly.
15. The water may turn milky during descaling. This is normal and indicates that limescale is being removed.
16. Switch off the pump.
17. Place an empty jug beneath the bottom fitting.
18. Remove the blue bottom cap and allow the used descaling solution to drain into the jug.
19. Refit the blue bottom cap.
20. Refill the EASY-SCALE chamber with clean fresh water.
21. Run the pump again for at least 5–10 minutes to rinse the internal system.
22. Repeat the drain and rinse process if necessary until the water runs clear.
23. Remove the EASY-SCALE kit from the pump.
24. Store the assembled pipes inside the EASY-SCALE chamber ready for next use.
25. Refit the original Wave Spa pump fittings.
26. Replace the filter and refill the hot tub with water.
27. Switch the pump back on and use as normal.

View Full Details

Product Description:

Protect your Wave Garda and keep it performing at its best with the EASY-SCALE Hot Tub Descaler Kit, a specialist maintenance solution designed to remove harmful limescale build-up from the spa’s integrated heater, pump and internal waterways. Made specifically for compatible Wave Spa systems, this easy-to-use kit helps restore efficiency, improve water flow and reduce the risk of common problems caused by hard water deposits.

Working in much the same way as a coffee machine descaling cycle, the EASY-SCALE system allows a descaling solution to circulate directly through the internal components of your Wave Garda, reaching areas that normal cleaning products cannot access. As the solution works, it breaks down and removes accumulated limescale that can restrict circulation, reduce heating efficiency and place unnecessary strain on the pump and heater. This build-up can be a hidden cause of performance issues and error codes such as E3, making regular descaling an important part of maintaining your spa.

Limescale can develop surprisingly quickly, especially in hard water areas, and a simple way to gauge the potential risk is to look inside your kettle. If you regularly see white scale deposits there, the same process can also be taking place inside your hot tub’s heating and circulation system. Left untreated, these deposits may reduce performance and contribute to premature wear on important internal components. The EASY-SCALE kit provides a straightforward preventative maintenance solution, helping to keep your Wave Garda running smoothly while protecting the parts you cannot normally see or clean.

Designed for straightforward home use, the kit includes the EASY-SCALE chamber, screw-on caps, pre-assembled fitting pipes and descaling solution for UK orders. Once connected, the system circulates the cleaning solution through the integrated heater and pump before being thoroughly rinsed with fresh water. Regular treatments help maintain strong water flow, efficient heating and reliable spa performance throughout the year.

For most users, EASY-SCALE recommends descaling three to four times per year, although more frequent or repeated treatments can be useful in particularly hard water areas. Whether you are trying to prevent future problems or dealing with reduced performance and an E3-related issue, the EASY-SCALE Hot Tub Descaler Kit offers a simple and cost-effective way to care for your Wave Garda and help extend the life of its internal components.

Like this EASY-SCALE model, but not 100% comitted? Why not see what other designs they have to offer...